Bulletin category: Domestic tender
Tenderee: Datang Environmental Industry Group Co., Ltd. Source of funding: Others (Part 1 of the tender) Datang Environmental Industry Group Co., Ltd. Hebei Datang International Tangshan Northern Suburbs 2×350 MW Unit Cogeneration Project Dust removal, ash removal, slag removal EPC engineering dust collector steel components procurement tender notice
1 Basic situation
1.1 Project name: Dust removal, ash removal, and slag removal EPC project of 2×350MW unit of Hebei Datang International Tangshan North Suburbs
1.2 The name of the target: procurement of dust collector steel components
1.3 Source of Funds: Self-financing
1.4 Construction Site: Hebei Province
1.5 Construction Scale: 2×350MW
1.6 Planning Period: 18 months
1.7 Project Description:
This technical specification is applicable to the design and manufacture of the dust removal, ash removal, and slag removal EPC engineering dust collector steel structure parts of the 2×350 MW unit cogeneration project of Hebei Datang International Tangshan Northern Suburbs. It proposes the design of this equipment (detailed design). Technical requirements and scope of supply for production, testing and testing.
1.8 Tenderee: Datang Environmental Industry Group Co., Ltd.
1.10 Bidding scope: (Indicate the scope, content, scale, quantity, technical specifications, delivery time, delivery method, delivery place requirements, etc. of the tender for this tender)
Tender number
The name of the target
Specifications
unit
Quantity
delivery time
Delivery Method
trading locations
Note
CWEME-DTHJ201612-WZ03
Precipitator steel components procurement
See technical specifications
Sets
2
Unit 1 will begin delivery on March 20, 2017. All shipments will arrive on the site on May 10, and Unit 2 will begin delivery on May 20, 2017. All shipments will arrive on-site on July 10.
Car board
Project construction site
2 Bidder qualification requirements
2.1 Qualified bidders and their bid products must meet the following general qualification requirements:
2.1.1 Bidders must be legal entities registered in the territory of the People's Republic of China.
2.1.2 The bidder shall have the manufacturing capabilities of the corresponding equipment, and shall have the ability to undertake the tendering project in terms of personnel, equipment, funds, etc., as well as the inspection capability of products, components, components, materials and accessories. Unless otherwise specified, these qualifications, qualifications and performance are all rights and interests of the bidder’s own company.
2.1.3 Designed and manufactured products with the same structure, the same type, the same or more technical specifications as the bid product. Under the same or more strict normative conditions as the specification, the quantity or supply quantity of the product and its successful operation time meet the requirements of the tenderer. If there are different types of equipment in the same tender section, the applicant must meet the eligibility requirements for each category of equipment in the tender section.
2.1.4 Acquire an effective product test and appraisal report issued by an international authoritative organization or a product inspection and testing agency authorized and licensed by the State, and the report conclusion data shall meet the requirements of this tender.
2.1.5 Bidders have good bank credit and business reputation, are not being ordered to suspend business or go bankrupt, and assets have not been restructured, taken over and frozen.
2.1.6 In the past three years, during the fulfillment of the supply contract, after-sales service and product operation, there has been no breach of contract after the successful bidder, serious breach of contract provisions during the performance process, and major quality problems in the product supply.
2.1.7 is not suspended or canceled.
2.1.8 The Commonwealth does not accept bids for this consortium.
2.3 Other requirements:
1. Registered capital is no less than 20 million yuan;
2, only accept the manufacturer's bid;
3. It must have two or more sets of the same performance within the same five years as the tendering equipment and have good operating experience. No major equipment quality problems or effective improvement measures have been found during installation and commissioning.
4. Failed to satisfy our payment method and rejected its bid.
3, access to tender documents
3.1 Method of Obtaining: Any bidder who intends to participate in this bidding, (.)
3.2 Release date: November 16, 2016 to November 26, 2016.
(It takes about 5 days to process the CA certificate electronic key, including material preparation, mail processing, and CA certificate electronic key return time. Please properly consider the arrangement processing time. The overdue system will not be able to download the bidding documents, and the bidding fee will not be refunded at your own risk. )
(This account is only the bid fee account. Please refer to the attached table before the bidding documents for the details of the deposit account and remittance method.)
4 submission of bid documents
4.1 Deadline for Submitting Bidding Documents (Bid Deadline, the same below): Further notice.
4.2 Delivery Location: Beijing (the specific location will be notified otherwise).
4.3 Delivery method: The bidding documents shall be sealed as required and delivered to the designated place. If the goods are delivered late or not delivered to the designated place or are not sealed as required, the tenderee will not accept it.
Contact: Zhang Jie
Mobile:
phone
fax
E-mail:
In order to ensure that you can bid smoothly, please consult the bidding agency or the tenderer for detailed requirements for bidding before bidding or purchasing the bidding documents. The specific requirements and project conditions shall be interpreted by the bidding agency or the tenderee.
Modular UPS,Hot-Swappable Modularity,Pure Sinusoidal,Parallel Redundant UPS
Shenzhen Unitronic Power System Co., Ltd , https://www.unitronicpower.com