In March of this year, Volkswagen's third-generation Touareg SUV was unveiled in China. This is Volkswagen's first model with an active rear axle steering system. The front and rear wheels can be precisely adjusted according to specific driving scenarios. The new system also enhances vehicle stability at high speeds.
Driving scenario 1:
If the vehicle speed is higher than 37 km/h, the rear wheels will automatically rotate at an opposite angle to the front wheels. In other words, the front wheel turns to the left and the rear wheel automatically turns 5 degrees to the right, thereby improving the operability of the vehicle.
The all-wheel steering system reduces the turning radius from 12.19 meters to 11.19 meters. When parking, the effect is more significant. It is worth mentioning that this technology combines the all-wheel steering system with the Trailer Assist to achieve automatic steering of the trailer.
Driving scenario 2:If the speed is higher than 37 km/h, the steering of the rear and front wheels will be consistent when steering, which will make the operation smoother, especially when driving on country roads and tracks. When the vehicle changes lanes (such as fast overtaking), the all-wheel steering ensures the stability of the vehicle, as well as in the sudden evasive maneuvers.
After the new all-wheel brake is equipped with an air suspension system, it can perform automaTIc adapTIve suspension, height adjustment and electronic damping control. This feature pack enhances the flexibility of the Volkswagen Touareg.
Function description
The socket is ordinary converter,with two output 5V2A power USB power supply at the same time,can be very convenient in use electrical appliances and recharge the equipment at the same time,such as digital products like Iphone Ipad,MP3,MP4 etc.The charge apply to full range of international AC output,no-load power consumption less than 0.3W,with short circuit,overload,over-voltage protection,can be convenient for your life and save more energy
Timer Control Time Adgustment
1.Press the power switch 1 time,the 1HOUR LED will light on.The Timer into ON mode,USB and control socket output ON .
2.Continuously press the power switch the LED light on,the Countdown mode and LED light on will cycle change from 1HR,2HR,4HR,6HR,8HR,10HR.
3.Choose you need countdown time mode,the mode LED will lighto on,start countdown until countdown time finish,the control output and USB change to OFF
4.Then the countdown is start,The Time indicate LED will from high to low auto change until Countdown finish off.
Failure analysis:
1.check whether the power supply connection is good
2.check whether the USB cable is loosen
Warning Note:
1.Use indoor and dry location ONLY
2.The load max does not exceed 15A 3600W
3.This product does not convert voltage please do not miss use DO NOT exceed the maximum loading of 3600 Watts 15A
4.Always have earth connection for safety reason
5.If in doubt please consult with a qualified electrician
USB countdown timer, USB countdown timer socket, USB timer, USB charger timer, USB timer socket
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com