Product Description
Dead End Clamp Plastic Tension Clamp YJPA500 Anchor Clamp
This Conical wedge clamp composed of an opened thermoplastic body with very high mechanical and climatic resistance, an inner sheath consisting one or two insulating plastic wedges ensuring the clamping of the neutral messenger without damaging cable insulation. Two stainless bail ends are compressed on it to lock intoclamp. Simple assembling because the wedges open by pulling them back. The flexible steel loop can be fixed into a closed eye bracket
Product property: The plastic anchoring clamp is suitable for insulated low-voltage ABC cable. It is also suitable for multiple conductors.
Easy installation and perfect insulated function. It is in accordance with the NFC 33-042.
Dimension
Â
| Item No. | Conductor(mm2) | Messenger DIA.(mm) | Breaking Load(KN) |
| YJPA500 | 16-25 | 3-9 | 6 |
| YJPAP1500 | 50-70 | 11-14 | 10 |
| YJPAP2000 | 70-95 | 14-16 | 15 |
Â
Â
ÂProduct Description
Dead End Clamp Plastic Tension Clamp YJPA500 Anchor Clamp
This Conical wedge clamp composed of an opened thermoplastic body with very high mechanical and climatic resistance, an inner sheath consisting one or two insulating plastic wedges ensuring the clamping of the neutral messenger without damaging cable insulation. Two stainless bail ends are compressed on it to lock intoclamp. Simple assembling because the wedges open by pulling them back. The flexible steel loop can be fixed into a closed eye bracket
Product property: The plastic anchoring clamp is suitable for insulated low-voltage ABC cable. It is also suitable for multiple conductors.
Easy installation and perfect insulated function. It is in accordance with the NFC 33-042.
Dimension
Â
| Item No. | Conductor(mm2) | Messenger DIA.(mm) | Breaking Load(KN) |
| YJPA500 | 16-25 | 3-9 | 6 |
| YJPAP1500 | 50-70 | 11-14 | 10 |
| YJPAP2000 | 70-95 | 14-16 | 15 |
Â
Â
Li-Ion Battery With Smbus refers to the battery datas can be collect through equipments based on SMBUS data communication, it usually applied to the military grade battery which need higher safety level protection .but as these battery have SMBUS inside ,it also should meet these requirements as :
1.The rated voltage is high (the operating voltage of the unit is 3.7v or 3.2v), which is about equal to the series voltage of three nickel-cadmium or nickel-hydrogen charging batteries, so as to form the battery power supply group
2.The self-discharge rate is very low, which is one of
the most prominent advantages of the battery. At present, it can reach less
than 1% per month, less than 1/20 of the nickel hydrogen battery.
14.8V Li-ion Battery With SMBUS
Items specification
Charge voltage : 16.8V
Nominal voltage : 14.8V (4S4P)
Initial impedance : 200mΩ
Nominal capacity: 10.4Ah
Minimum capacity : 10.0Ah
Communication methods : SMBUS data communication
Charge current : Standard Charging::0.5C5A (5.20A
Rapid charge 1.0C5A C(10.4A) Max
Standard Charging method: 5.20A(0.5C5A) CC(constant current)charge to 16.8V,then CV(constant voltage 16.8V)charge till charge current decline to ≤104mA(≈0.01C5A)
Charging time: Standard Charging:4.5hours(Ref.)
Rapid charge: 2.5 hours(Ref.)
Max.discharge current: 10.4A(1.0C5A)
Discharge cut-off voltage: 11.0V
Shelf life: 2 years
Cycle life (0.2C5A/0.2C5A) : 500 times,≧80%DOD; 500 times,≧80%DOD
Li-ion Battery With SMBUS
Li-Ion Battery With Smbus,Lipo Battery,Battery Pack With Smbus,Smart Li-Ion Battery Pack With Smbus
YFJ TECHNOLOGY (HK) CO.,LIMITED , http://www.yfjpower.com