During the 13th Hi-Tech Fair, Shenzhen Junyi Anlian Company held a strategic cooperation signing ceremony with Shenzhen Huanancheng Holding Company, China Southern Power Grid Integrated Energy Co., Ltd. and Shenzhen Jialida Industrial Co., Ltd. The company's non-inverted rooftop solar (PV) light-emitting diode ( LED ) intelligent lighting control system and other new energy low-carbon project technologies have entered the stage of large-scale application.
According to reports, Junyi Allianz is a national high-tech company dedicated to the combination of solar photovoltaic and LED applications. Its non-inverter roof PV-LED intelligent lighting control system is mainly used in public lighting such as underground garages and corridors. At present, the company has completed more than 400,000 square meters of underground garage PV-LED lighting projects, the domestic market share of more than 90%. It is worth mentioning that the 100,000 square meters PV-LED project of the “OCT-Happy Coast†signed by the company last year has been completed, saving 2 million kWh per year and reducing carbon emissions by 1.57 million tons. The largest underground garage photovoltaic lighting project built. The 115,000 square meter underground garage solar lighting project in Nanning, Jiangnan, under the signing of the South China City Holding Company, will mark the largest PV-LED garage lighting project in China.
Function description
The socket is ordinary converter,with two output 5V2A power USB power supply at the same time,can be very convenient in use electrical appliances and recharge the equipment at the same time,such as digital products like Iphone Ipad,MP3,MP4 etc.The charge apply to full range of international AC output,no-load power consumption less than 0.3W,with short circuit,overload,over-voltage protection,can be convenient for your life and save more energy
Timer Control Time Adgustment
1.Press the power switch 1 time,the 1HOUR LED will light on.The Timer into ON mode,USB and control socket output ON .
2.Continuously press the power switch the LED light on,the Countdown mode and LED light on will cycle change from 1HR,2HR,4HR,6HR,8HR,10HR.
3.Choose you need countdown time mode,the mode LED will lighto on,start countdown until countdown time finish,the control output and USB change to OFF
4.Then the countdown is start,The Time indicate LED will from high to low auto change until Countdown finish off.
Failure analysis:
1.check whether the power supply connection is good
2.check whether the USB cable is loosen
Warning Note:
1.Use indoor and dry location ONLY
2.The load max does not exceed 15A 3600W
3.This product does not convert voltage please do not miss use DO NOT exceed the maximum loading of 3600 Watts 15A
4.Always have earth connection for safety reason
5.If in doubt please consult with a qualified electrician
USB Charger Socket, Fast Charge USB Wall Socket, USB Plug Socket, USB Socket Charger, Socket USB charger
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsockets.com