The simplest eight-way marquee circuit diagram

Single chip microcomputer STM32L151CCU6
1206RGB (single)
Manufacturers produce direct sales LED lamp bead patch lighting products 0805 white light super bright indicator light dedicated
3528 white light 6-7LM 3528 lamp led light led patch
The simplest eight-way marquee circuit diagram
The simplest eight-way marquee circuit diagram <1>

In this example, the delay subroutine, clr, lcall, and ajmp instructions are mainly used to achieve the effect by lighting p1.0 .....P1.7 in turn. Users can learn the IO port operation of the MCU through the learning of this program.

Reference procedure:

Experiment 1 The simplest 8-way marquee. Connect the P1 port (JP44) of the CPU part to the JP32 of the eight-way indicator part with an 8PIN data cable; you can see that the 8-way light flashes in turn.

Org 0000h ; start

Ajmp loop

Org 0030h ; avoid the 00-30 sensitive address by 0030h

Loop:

Mov p1, #0ffh; turn off all lights

Clr p1.0 ; light lamp p1.0

Lcall delay; delay for a while?

Clr p1.1 ; lighting lamp p1.1

Lcall delay

Clr p1.2 ; lighting lamp p1.2

Lcall delay

Clr p1.3; lighting lamp p1.3

Lcall delay

Clr p1.4 ; lighting lamp p1.4

Lcall delay

Clr p1.5; lighting lamp p1.5

Lcall delay

Clr p1.6 ; lighting lamp p1.6

Lcall delay

Clr p1.7 ; lighting lamp p1.7

Lcall delay

AJMP LOOP; re-run at the beginning of the loop

Delay: mov r5, #20; delay.

D1: mov r6, #40

D2: mov r7, #248

Djnz r7,$

Djnz r6,d2

Djnz r5, d1

Ret

End

510 Cartridge

·Basic precautions

Do not put expensive oil into low-quality cartridges to avoid wastage. Most pre-filled oil cartridges have the so-called 510 thread. The oil cartridge screws onto a rechargeable battery. Some of these batteries have buttons and some heat up automatically when you pump the oil. Some batteries have multiple temperature settings and some heat up to a preset temperature; these features need to be known in advance.

·Cleaning notes

Use a suitable cleaning tool to clean them, such as activated charcoal or dried tea leaves in a used pipe to absorb the oil. It is important not to use alcohol or other boiling water to clean the pipe, and to wait until it has cooled down completely before cleaning. Otherwise, the hot stem will come into contact with the watery liquid and cause the mouthpiece tenon to loosen, thus shortening the life of the 510 cartridges.

This is what you should be aware of when using 510 cartridges. At the same time, when using 510 cartridges, there are still some vaping tips, for example, when using them, be careful not to suck too hard, will not produce smoke. When you inhale too hard, the smoke is sucked directly into your mouth and not atomized by the atomizer, so gently inhaling is more powerful and gives you a better vaping experience.

510 Cartridge Oem,Leakproof 510 Cartridge,510 Battery And Cartridges Oem,510 Cartridge

Shenzhen MASON VAP Technology Co., Ltd. , https://www.masonvap.com