CCID Consulting believes that due to factors such as the global financial crisis, China's LED market growth rate in 2008 has declined to a certain extent year-on-year, and sales are expected to increase by about 12% year-on-year.
After years of rapid development, influenced by factors such as the global financial crisis, the growth rate of China's LED market in 2008 has declined to a certain extent compared with that in 2007. It is expected that the growth rate of LED market sales in 2008 will only reach about 12%. .
However, compared with other semiconductor products, due to the wider application of LEDs and less dependence on consumer products, the financial crisis has also had a negative impact on the LED industry, but its impact is relatively weak, and because LED has great potential in landscape lighting, street lighting, large-size backlights, automobile lights, etc., and its development prospects are still good.
From the perspective of LED market applications in 2008, LED indicators, LED displays, mobile phone keyboards and camera flashes, and LCD backlights rank among the top four sales areas. In terms of sales, LED displays, LED indicators, LCD backlights, and mobile phone keyboards and camera flashes are among the top four. Although these four fields occupy the mainstream position of the Chinese LED market, due to different factors, the development of these four major application areas in 2008 is still affected.
Although the development of China's LED market in 2008 encountered certain obstacles, its market growth rate has declined to a certain extent compared with that in 2007. However, LED has the advantages of green, environmental protection and energy conservation, which is in line with the international energy conservation and emission reduction development policy. The overall trend of the market in the future is still good. On the other hand, LEDs will be further developed in the emerging application markets such as large-size backlights, landscape lighting, automotive lights, and low-temperature lighting in the next few years, and will gradually become another booster for the development of the LED market.
CCID Consulting believes that due to factors such as the global financial crisis, China's LED market growth rate in 2008 has declined to a certain extent year-on-year, and sales are expected to increase by about 12% year-on-year.
After years of rapid development, influenced by factors such as the global financial crisis, the growth rate of China's LED market in 2008 has declined to a certain extent compared with that in 2007. It is expected that the growth rate of LED market sales in 2008 will only reach about 12%. .
However, compared with other semiconductor products, due to the wider application of LEDs and less dependence on consumer products, the financial crisis has also had a negative impact on the LED industry, but its impact is relatively weak, and because LED has great potential in landscape lighting, street lighting, large-size backlights, automobile lights, etc., and its development prospects are still good.
From the perspective of LED market applications in 2008, LED indicators, LED displays, mobile phone keyboards and camera flashes, and LCD backlights rank among the top four sales areas. In terms of sales, LED displays, LED indicators, LCD backlights, and mobile phone keyboards and camera flashes are among the top four. Although these four fields occupy the mainstream position of the Chinese LED market, due to different factors, the development of these four major application areas in 2008 is still affected.
Although the development of China's LED market in 2008 encountered certain obstacles, its market growth rate has declined to a certain extent compared with that in 2007. However, LED has the advantages of green, environmental protection and energy conservation, which is in line with the international energy conservation and emission reduction development policy. The overall trend of the market in the future is still good. On the other hand, LEDs will be further developed in the emerging application markets such as large-size backlights, landscape lighting, automotive lights, and low-temperature lighting in the next few years, and will gradually become another booster for the development of the LED market.
For LED lighting applications, the lighting application is still in a weak position throughout the application market. The main applications are still concentrated in the fields of landscape lighting, interior decoration, LED street lights, etc. It still takes a certain time for LEDs to enter the general lighting market. In recent years, LED street lights have gradually gained market attention. At present, local governments are actively promoting the construction of LED street lights. For example, at the end of 2008, Guangdong launched the Thousand Miles Plan and the LED Demonstration Project of Tianjin Polytechnic University.
Although local governments are actively promoting the development of LED streetlight demonstration projects, as LED street lamps still need to be improved in terms of product stability, and the product prices still have a large gap with traditional products, the commercialization of LED street lamps still needs to be certain. time. In addition to L comments this article (0) other comments on the topic (0) related information financial community (0) ED street lights, low-temperature lighting in recent years in the global market has also developed rapidly, becoming a new niche market for LED, the United States, Japan and Taiwanese hypermarkets all have LED low-temperature lighting products. Although the market has not yet started in China, there is still a broad market development prospect in the future.
In addition, LED car lights have also become a hot spot for market attention. At present, LEDs have been widely used in automotive interior lighting, and applications in emergency brake lights have gradually increased. At this stage, LEDs are gradually transitioning to automotive headlights, taillights and other products. Some models using LED lights have appeared on the market. LEDs show a trend from the inside to the outside and from the back to the front in automotive applications.
Photo: Beijing-Hangzhou Grand Canal Hanging Night Lighting officially lights up [Beijing-Hangzhou Grand Canal Hanging Lighting Project Revealed] [Happy Lantern Festival Light Album]
1
1.ANTENK Wire to Board connectors are avialable in different terminations and sizes intended for use on a variety of applications. These connectors provide power and signal with different body styles, termination options, and centerlines. To find the wire to board set required, click on the appropriate sub section below.
2.Our products are widely used in electronic equipments,such as monitors ,electronic instruments,computer motherboards,program-controlled switchboards,LED,digital cameras,MP4 players,a variety of removable storage disks,cordless telephones,walkie-talkies,mobile phones,digital home appliances and electronic toys,high-speed train,aviation,communication station,Military and so on
Antenk Wire To Board Connectors Ranges:
Power Wire to Board
IDC Wire to Board
Locking Wire to Board
Latching Wire to Board
Fine Pitch Wire to Board
Wire to Board Connectors Information
Description
Wire-to-board connectors are used to interconnect printed circuit boards (PCBs) by using connectors attached to wires.
Specifications
Specifications for a wire to board connector include the following.
Wire-entry angle - There are three wire-entry angle styles: vertical, right-angle, and bottom-entry.
Wire size - Wire size is usually measured in American wire gauge (AWG), a standard for non-ferrous wire conductor sizes. The term "gauge" refers to the wire`s diameter. The higher the gauge number, the smaller the diameter and the thinner the wire.
Circuits or positions - With wire to board connectors, the number of circuits or positions may range from 1 to 120.
Pitch or center spacing - Pitch or center spacing is measured in millimeters (mm) or inches.
Lock to mating style - There are three basic lock-to-mating styles: positive, friction, and friction ramp.
Maximum current - The maximum current or current-carrying capacity is measured in amperes (A) and ranges from 1.0 A to 50. A.
Termination Methods
Crimp is the physical compression of a contact wire around a conductor to make an electrical and mechanical connection. Insulation displacement connectors (IDC) slice through the cable insulation to make a connection. Choices for termination method also include cage clamp, screw, tabs, and solder cups.
PCB Mounting Styles
With wire to board connectors, there are four choices for PCB mounting.
Through-hole technology (THT) mounts components on a PCB by inserting component leads through holes in the board and then soldering the leads in place on the opposite side of the board.
Surface mount technology (SMT) adds components to a PCB by soldering component leads or terminals to the top surface of the board. SMT components have a flat surface that is soldered to a flat pad on the face of the PCB. Typically, the PCB pad is coated with a paste-like formulation of solder and flux.
Press-fit and compression-style Board To Board Connectors are also commonly available.Wire to Board Connectors Information
Standards
Wire-to-board connectors carry approvals from various national and international organizations. In North America, they often bear marks from Underwriters Laboratories (UL) and/or the Canadian Standards Association (CSA).
A wire to board connector for the European marketplace should comply with the Restriction of Hazardous Substances (RoHS) and Waste Electrical and Electronic Equipment (WEEE) directives from the European Union (EU). Wire-to-board connectors that comply with other requirements are also available.
BS 9526 N0001 - Specification for multi-contact edge socket electrical connectors.
Wire To Board Connectors,Wire Harness,Pcb Wire To Board Connector,Pin Wire To Board Connector,IDC Wire to Board,Locking Wire to Board,Latching Wire to Board,Fine Pitch Wire to Board
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com