Recently bought a Samsung superbook, the model is 530U3C. Probably configured is i5 chip, single 4G memory, 24G solid state hard disk +500G ordinary hard disk, because it is pre-installed Win7 home version and is installed on 500G ordinary hard disk, want to install on SSD hard disk to improve speed and change the flagship version Win7, the result is found:
1, in the BIOS settings, one point to disable the 'quick start', otherwise you will not find the U disk, of course, you can not install the system from the U disk.
2, also in the bios settings, secure boot is set to disabled, then, the following os mode selectTIon is csm os.
3, advanced, ahci mode control is set to manual, then set ahci mode is set to disabled.
4, Samsung 530U3C this super has 2 hard drives, but in the BIOS, he blocked the SSD hard drive. This leads to the inability to choose to boot from this hard drive if you want to install the system in an SSD. And if you install the system on a normal hard drive, after installation, he will automatically put the bootmgr folder on the SSD, which will cause the system to fail to boot.
I haven't found a way to find the network, and I almost despair. After 5 hours of research and experimentation, I have successfully completed this e-commerce major, sharing my experience as follows:
Installation principle:1, windows 7 boot process: advanced BIOS, choose to boot the hard disk, and then load the first sector of the boot hard disk MBR, then MBR find the bootmgr boot disk in the boot disk is loaded into the memory, then bootmgr find boot hard disk boot partition BCD file in the boot folder, this file describes the next boot hard disk (multi-hard disk situation) and the partition where the win7 system is located;
2, when installing win7, the 100M partition generated in the hard disk is to store bootmgr, boot folder (including BCD file), in order to indicate where the boot disk and partition are;
3, mechanical hard disk + SSD hard drive Samsung superbook, is to let the mechanical 500G hard disk on the 100M partition as a boot partition, boot the computer to start the new installation win7 partition on the SSD hard disk;
Operation preparation:
Download BootCD and UltraISO, use UltraISO to make Win kernel U disk winPE boot disk, download DiskGenius3.8 green version and booTIce.exe and copy it to U disk boot disk; U disk win7 system installation disk;
Actual operation:
Case 1, just reloading ideas:First, insert the u disk system installation disk, restart the computer, F2 enter bios disable the bios quick start, then ctrl+alt+del restart the computer, press F10, select the U disk boot disk to enter the win7 installation interface, in the hard disk and partition list interface Delete all partitions, keep the 100M partition in the original 500g only for formatting, and then create a new SSD hard disk partition. At this time, a 100M partition will be automatically generated, and then win7 will be installed in the newly created SSD hard disk partition. The process is waiting. Insert the prepared USB flash drive in advance, the computer will restart after the win7 installation. After restarting, press F10, select winPE boot disk to enter the PE system, then open DiskGenius3.8, right click on the original 500G partition to select the main partition. And confirm that it is active, then right click on the newly generated 100M partition in the SSD hard disk, select the clone partition, clone all the files in the partition to the 500M 100M partition, and delete the 100M partition of the SSD after completion; Start booTIce.exe in winPE, then select edit BCD file, select the BCD file in the underground folder of the 100M partition in the 500G cloned. BCD boot disk is not pointing SSD hard drive, SSD hard drive is not the boot partition newly installed win7 partition, if it is not changed a bit; restart the computer, OK!
Case 2, just as confident and full of reinstalling the system as I did, deleted all the partitions, including the original 100M partition, but found that it could not be opened:First, insert the u disk system installation disk, restart the computer, F2 enter bios disable the bios quick start, then ctrl+alt+del restart the computer, press F10, select the U disk boot disk to enter the win7 installation interface, in the hard disk and partition list interface Delete all partitions, and then create a new SSD hard disk partition, then automatically generate a 100M partition, and then install win7 in the newly created SSD hard disk partition, the process waits to insert the prepared U disk winPE in advance, all after the win7 installation The computer will restart, press F10 after reboot, select winPE boot disk to enter PE system, then open DiskGenius3.8, select 500G hard disk, search for lost partition information, and see if it finds 100M partition, whether it is formatted or not. After formatting, keep one and stop searching. Right click and select the 100M partition to be converted into the main partition, and confirm that it is active. Then right click on the newly generated 100M partition in the SSD hard disk, select the clone partition, and select the file in the partition. All cloned into the 500M 100M partition, after completion, delete the SSD 100M partition; start booTIce.exe in winPE, and then select Select the BCD file, select the BCD file in the underground folder of the 500M partition in the 500G, and see if the boot disk pointed to by the BCD is an SSD hard disk. Is the boot partition a newly installed win7 partition in the SSD hard disk, if not Modify it; restart the computer, OK!
Copper Tube Terminals Without Checking Hole
Our company specializes in the production and sales of all kinds of terminals, copper terminals, nose wire ears, cold pressed terminals, copper joints, but also according to customer requirements for customization and production, our raw materials are produced and sold by ourselves, we have their own raw materials processing plant, high purity T2 copper, quality and quantity, come to me to order it!
Copper Tube Terminals Without Checking Hole,Cable Lugs Insulating Crimp Terminal,Cable Connector Tinned Copper Ring Terminal,Tubular Cable Lugs Crimp Terminal
Taixing Longyi Terminals Co.,Ltd. , https://www.lycopperlugs.com