Projector maintenance technology combat sharing - Home Appliances

MOS power IC full range

KKST patch plug-in active passive crystal oscillator hot sale 24.576000MHZ

Does the projector produce image color distortion?
A: If the projector produces image color distortion, it indicates that there is a problem with the color setting of the projector. You can press the projector remote control or the menu button on the projector control panel and select all the reset commands under the display menu. If this method does not solve the color problem, you need to carefully check whether there is a bent or broken pin on the display signal line. If the pin is damaged, you need to replace the display signal line.

Will the projector suddenly shut down during work?
A: If the projector suddenly shuts down during work, there are two main reasons. First, the user may accidentally cut off the power of the projector during operation. Therefore, you should first check if the projector is turned off due to human factors. After eliminating this situation, it means that the projector itself has a problem, and it is likely to be caused by thermal protection. Because there are many high-end projectors in order to extend the life of the projector, a self-thermal protection function is often used. When there is too much heat generated inside the projector, the working state of the projector will automatically work under this protection state. The projector is automatically turned off, and in this state, the projector does not respond to any external input control; therefore, when this happens, you should not worry about the sudden failure of the projector, you only need to shut down the projector automatically. After about half an hour, and then turn on the projector in the normal boot sequence, the projector will return to normal operation. 3. Why does the projection screen appear white or even blue-violet plaque?
Why does the projected image of the projector appear color cast?
A: There will be a white or even blue-violet plaque on the projection screen, indicating that the red polarizer in the internal optical system of the projector is damaged, so that the image projected by the projector will have a color cast phenomenon. The solution to this problem is Replace with a new red polarizer. However, the replacement of the red polarizer requires opening the outer casing of the projector. However, due to the high voltage inside the projector, it may cause harm to the human body. Therefore, it is best to ask a professional maintenance person to replace the red polarizer. You can also send the projector to the repair shop for replacement.
Can the projector resume normal operation after replacing the power cord?

A: If the projector can work normally after it has been unable to work and replace the power cord, it means that the projector itself has no problem. The problem should be on the projector power cable. Generally speaking, the power cord specifications and compatibility of the defective projector will be significantly different from the power cord specifications and compatibility of the original projector. Once the defective projector power cord is used, it may seriously affect the product. Stability of use. For example, the projector's power supply specifications are 110V and compatibility with 220V. If the manufacturer fails to modify the 110V power supply specification to become a product suitable for Chinese users, then this product will definitely come back after purchase. Poor compatibility and short life. Therefore, you must test the power of the projector on the spot when you buy it. Also check whether the normal working voltage of the projector is 220 volts.
Can't the projector project the picture?
A: The projector does not display the content correctly. The connection of the projector may be problematic. If the connection is good, check the laptop connected to the projector to see if the external video port of the computer has been activated. Generally speaking, the current laptop provides the FN function switch button. Pressing the button and clicking the corresponding function button labeled LCD/CRT or monitor icon activates the video port of the computer. In addition, you should also The projector's signal input port is used to switch the projector to the corresponding RGB port to ensure the projector's projection is normal.
Can't the projector project the entire image content?
A: The entire image content cannot be projected, indicating that there is a problem with the display resolution of the projector. At this time, you can readjust the resolution parameters of the computer and the resolution parameters of the projector so that their sizes match each other.
Does the projection machine produce distortion distortion?
A: The content projected by the projector is distorted. It is very likely that the position between the projector and the projection screen is not square. To eliminate this deformation distortion, you can adjust the projector's lifting foot or adjust the projection. The height of the screen is positioned to ensure that the image projected on the screen is rectangular.

Does the projector react without any power after it is turned on?
A: Since the projector does not respond after the power is turned on, it is likely that there is a problem with the power supply of the projector. But is there a problem with the internal power supply of the projector or the external power supply? To do this, you should check whether the external power supply specifications of the projector are the same as those required by the projector. For example, if the external power socket is not grounded or the power cable used by the projector is not equipped with the projector, It may cause the projector's power input to be abnormal. Once the external power supply is determined to be normal, you can conclude that the internal power supply circuit of the projector has been damaged. At this time, you only have to replace the new internal power supply of the projector.