5050LED patch led package and 3528 patch led package detailed
1, 3528 patch led and 5050 patch What is the difference
Mainly representative of the size of the specification: 35mm * 28mm, 50mm * 50mm size is not the same, the power is not the same, in the application of the patch, 3528 no matter the brightness or the life is not 5050 has an advantage, the size is not same.
2. What is the use of the 3528 and 5050 SMD LEDs?
3528, 5050, are the finished lamp sizes in the form of SMD surface-mount LED packages. Name by size.
The surface-mounted SMD lamp has a lower brightness than the in-line DIP lamp, but the maintenance is convenient and the viewing angle is larger. Therefore, almost all indoor LED display screens are SMD SMD LEDs.
3, LED flexible strip 5050
The 5050 is the model number of the LED package. Named after the size specification. Refers to the 5050 model LED lamp bead.
4. What is the use of the 3,528 and 5050 SMD LEDs?
3528, 5050, are the finished lamp sizes in the form of SMD surface-mount LED packages. Name by size.
The surface-mounted SMD lamp has a lower brightness than the in-line DIP lamp, but the maintenance is convenient and the viewing angle is larger. Therefore, almost all indoor LED display screens are SMD SMD LEDs.
5. What does it mean to be compatible with piranhas 02.03.04? What is SMD? The high power is how the piranha is made up of SMD chips, and 02.03.04 is the model of the LED bracket.
Abbreviation for Surface Mounted Devices, meaning: Surface Mount Device SMD is a unified model of the product. For example: TOP, Chip, can be SMD, which is a flat package.
The SMD chip is a bit general, using a 5050 or 3528 patch chip to make a piranha.
Of course, there are many different chip sizes. Often used to make SMD size from 7 × 9mil - 24 × 10mil.
The high power is: if the voltage exceeds 0.5W, it can be called high power.
Basic knowledge of LED test technology
Forward voltage: The voltage drop that occurs between the two poles when the forward current through the LED is a certain value.
Reverse current: The current flowing through the LED when the reverse voltage across the LED is a certain value.
Peak wavelength: The wavelength at which the spectral radiant power is at its maximum.
Half-intensity angle: In the illuminating (or radiant) intensity distribution, the illuminating (or radiant) illuminating intensity is greater than or equal to the angle formed by half of the maximum intensity.
Main wavelength: any color can be seen as a certain spectral color mixed with a reference light source (such as CIE standard light source A, B, C, etc., energy source E, standard illuminant D65, etc.) The color of this spectrum is the dominant wavelength of the color. The dominant wavelength of the color is equivalent to the hue (mental amount) of the color observed by the human eye. If the chromaticity coordinates of the LED device under test have been obtained, an equivalent energy white light source (x0=0.3333, y0=0.3333) can be used as the reference light source to calculate the dominant wavelength of the determined color. In the calculation, according to the slope of the straight line connecting the reference light source chromaticity point and the sample color chromaticity point on the chromaticity diagram, look up the intersection of the readout straight line and the spectral trajectory to determine the dominant wavelength.
Average intensity: the ratio of the luminous flux dΦv contained in a small solid angle element of a light source in a given direction to this solid angle dΩ is Candela (cd)
Radiation bandwidth: The wavelength interval at which the spectral radiant power is greater than or equal to half the maximum value.
Lighting Pole,Outdoor Lighting Pole,Led Lighting Pole,Park Lighting Pole
YIXING FUTAO METAL STRUCTURAL UNIT CO.,LTD( YIXING HONGSHENGYUAN ELECTRIC POWER FACILITIES CO.,LTD.) , https://www.chinasteelpole.com