Electronic platform weighing maintenance and maintenance - Database & Sql Blog Articles

PESD1CAN electrostatic protection SOT23-3 24V two-way
24V, 17pF, surface mount CAN bus ESD protection diode

Maintenance and maintenance of electronic platform scale

Now let's talk about the maintenance and repair of the weighbridge. It must be verified by the local metrology department or the authorized metrological department before it can be put into use.

Before use, first check whether the scale body is flexible and the performance of each accessory component is good.

First, the maintenance of the weighbridge:

The operator must be trained to operate, and the repairer must not disassemble any components without knowing the necessary knowledge, so as not to affect the measurement accuracy or damage the system.

The operator of the instrument must carefully digest and absorb the instructions of the instrument, master the basic principles, and be familiar with the instrument maintenance method before it can be used officially.

In order to ensure accurate measurement of the system, protection from wind and rain, it is conducive to the operation, and it is required to set up a work shed and a weighing scale room.

There should be a junction between the weighing platform and the slope

10-15mm

Clearance, no collision or friction.

The weight of the truck to be measured shall not exceed the rated value of the system.

In order to ensure the normal measurement of the instrument, it should be verified regularly.

No foreign objects may be stuck in the lower part of the weighing platform.

Second, the use of the weighbridge:

After the meter is turned on, it can be used after it is stable.

When the vehicle enters the weighing platform (or place the heavy object as light as possible), the speed should be less than

5km/h

Then slowly brake and measure after the car stops.

Stay as close as possible to the center of the weighing platform.

The meter reading must read the correct weight value when the “Stability” indicator is lit.

Before powering up the system, you must check whether the power supply and grounding device are reliable. When the machine is off, you must unplug the instrument and cut off the power.

Our professional production and sales:

Truck scale

,

electronic

Weighbridge

,

Wheelchair scale

,

Roller scale

,

Forklift scale

,

Electronic station

(Welcome to the company website:

Http://

)


Machine Roomless Elevator

Machine Roomless,Machine Room Less Lift Detail,Gearless Machine Room Less Elevator,Machine Room Less Elevator Specifications

XI'AN TYPICAL ELEVATOR CO., LTD , https://www.chinaxiantypical.com