Singapore, April 11, 2013- FCI, a leading manufacturer of high-speed I / O optical cable and copper interconnection systems, is adding micro-SAS HD-based active optical cable (AOC) components to its entire active optical cable product line .
FCI's micro-SAS HD products fully comply with the SFF-8644 standard and meet the various signal integrity requirements set forth in the SAS 2.1 (6G) protocol and SAS 3.0 (12G) protocol. The optical cable is a spiral optical cable with a diameter of 2.9 mm, considering that it can be easily routed in any direction, and the cable is also equipped with a protective sleeve that can accommodate the straight cable outlet at the back of the connector end, or the right angle of the cable Export.
"The development of micro-SAS HD active optical cables is consistent with the value positioning of FCI ’s high-speed I / O. The addition of this AOC component gives FCI the ability to provide a complete and fully qualified micro-SAS HD product line, equipped The internal and external board end connectors required by the industry standard configuration are equipped with corresponding internal and external mating cable assemblies, and these cable assemblies can be optical or copper cables. "Jim David, director of FCI high-speed I / O product series, explained .
In addition, the mini-SAS HD board connector adds a heat sink to enable the maximum heat dissipation capacity required when using active optical cables in various systems. The cable length ranges from 5 to 100 meters.
During the exhibition, a mini SAS HD active optical cable will be demonstrated live. For other information, please contact us by email.
About FCI Electronics
FCI Electronics is a leading global manufacturer of interconnected products and cable assemblies, combining its wide range of products with on-site engineering resources to meet specific customer needs. The company has 6,500 employees worldwide and achieved sales of US $ 555 million in 2012. FCI Electronics provides mature connected products and innovative solutions for various markets such as data communications, telecommunications, consumer products, industry, instrumentation, medical and renewable energy.
FCI Electronics' full range of products consists of mature traditional products and innovative design products, including backplane connectors, board line systems, active optical cables, transceivers, fiber optic adapters, high-speed connectors, I / O connectors, mezzanine connections Devices, PCB termination modules, flexible connectors, power solutions, memory interfaces, and custom cable assemblies. For more information, please visit the website.
Test items
The performance indicators are tested using a dedicated Ethernet test instrument, and the test results of these performance indicators can also evaluate whether the LAN system meets the acceptance requirements. From GBT21671-2008 "Ethernet-based LAN System Acceptance Evaluation Specification", it can be understood that LAN can also judge performance by measuring performance indicators such as network throughput, transmission delay, and packet loss rate. The Ethernet tester is a rugged test platform suitable for field use. It has a complete Ethernet test function, dual optical ports and dual electrical ports, Ethernet service interface module, HST-3000 supports multiple data stream tests. Including 10/100/1000M Ethernet link traffic generation and troubleshooting, it can test electrical and optical port links up to 1Gbit/s. Due to the limitation of various conditions in the acceptance inspection, point-to-point or routing network testing can be supported for routine testing of switches.
The problem
The overall characteristics of modern test instruments are high reliability, high performance and high applicability. Therefore, the gap between domestic test products and foreign products is reflected in this aspect. Although some domestic testing equipment is close to the international advanced level in certain performance indicators, there are generally few products with comprehensive equipment performance indicators that meet international standards. In addition, most of the domestic test instruments are common specifications, which cannot meet the test work in some special environments. Low-level automated testing is also a common problem. [3]
Switch test technology
Nowadays, switches put forward new requirements on the performance of switches based on application requirements. There have been new developments in comprehensive network services, security, and intelligence. Protocol testing is a basic switch testing technology. The network protocol is to improve the efficiency of testing and the effectiveness of communication to ensure the rules of communication. In the era of increasing network communication, network protocols are also indispensable. The basic requirements of network protocols are correct functions, good interoperability and superior performance. The initial prototype of protocol testing is software testing, and the main categories are black box testing, white box testing and gray box testing.
Ethernet Switch,Web Management Switch,Non-Web Management Switch,Reverse Power Switch,10G Switch,Combo Port
Shenzhen GL-COM Technology CO.,LTD. , https://www.szglcom.com